1m Self Adhesive PVC Corner Trim – 90° Plastic Angle Edge Protector

This Self Adhesive PVC Corner Trim is designed to protect and neatly finish internal corners and external edges around a wide range of interior surfaces.

Made from a rigid PVC blend, the 90° angle profile has a smooth, consistent colour finish on both sides and is easy to wipe clean. The integrated self-adhesive tape allows fitting without drilling or visible screws on suitable prepared surfaces.

Available in seven profile sizes, four colours and a 1 metre / 3.28ft length, the trim can be used for both protective and decorative corner-finishing projects.

Key Features

• 90° rigid PVC angle profile
• Self-adhesive backing
• No screws or drilling required
• Seven profile size options
• 1m / 3.28ft length
• White, Light Grey, Grey and Black options
• Smooth matching finish on both sides
• Helps protect corners and edges from everyday mechanical contact
• Adhesive designed to resist ageing and water splashes
• Easy-clean surface
• Can be cut to the required length
• Suitable for a wide range of common building surfaces

Product Specifications

Available Sizes

Choose the profile according to the amount of corner or edge coverage required:

• 20x10mm – 0.78in x 0.39in
• 15x15mm – 0.59in x 0.59in
• 20x20mm – 0.78in x 0.78in
• 25x25mm – 0.98in x 0.98in
• 30x30mm – 1.18in x 1.18in
• 40x40mm – 1.57in x 1.57in
• 50x50mm – 1.96in x 1.96in

Width and height depend on the selected variant.

Problems This PVC Corner Trim Helps Solve

Exposed Corners and Edges

Uncovered wall, tile or panel edges can look unfinished and may be vulnerable to everyday knocks. The PVC angle creates a defined protective finish.

Chipped or Untidy Existing Edges

Where an edge already looks worn or uneven, the trim can help cover the visible area and improve the overall appearance.

Customers Who Do Not Want to Drill

The integrated adhesive tape provides a straightforward fixing method without screws, plugs or drilling on suitable surfaces.

Difficult Colour Matching

White, Light Grey, Grey and Black options make it easier to coordinate the trim with walls, tiles, furniture or interior details.

Different Edge-Coverage Requirements

Seven available profile sizes allow customers to choose a smaller discreet angle or a wider profile where more edge coverage is required.

Benefits of This Self Adhesive PVC Angle Trim

Corner Protection

The rigid PVC profile helps shield internal and external edges from routine mechanical contact.

Quick Self-Adhesive Fitting

The pre-applied adhesive removes the need for separate mechanical fixings in suitable applications.

Smooth Finish on Both Sides

Both faces of the 90° angle have a consistent smooth colour finish for a cleaner installed appearance.

Easy to Maintain

The smooth PVC surface can be wiped clean, making it practical for everyday interior use.

Flexible Size Choice

Seven different dimensions make it easier to select a profile that suits the particular corner, edge or decorative application.

Suitable Surfaces & Applications

The trim can be used on compatible:

• Walls
• Tiles
• Terracotta
• Wood
• Metal
• Plastic surfaces
• Internal corners
• External wall edges
• Panel edges
• Decorative corner details
• Residential interiors
• Trade and refurbishment projects

Always check that the chosen surface is suitable for adhesive fixing and can be cleaned and degreased properly before installation.

Installation Guide

1. Install the profile at normal room temperature.

2. Measure the required area and cut the PVC trim to length using suitable scissors, a knife or another appropriate cutting tool.

3. Make sure the surface is level, clean, dry and thoroughly degreased.

4. Test-position the profile before removing the protective film.

5. Peel away the film from the self-adhesive tape and align the 90° trim carefully over the corner.

6. Press firmly against both surfaces for several minutes to maximise initial contact.

Avoid fitting over loose, dusty, greasy or uneven surfaces, as these can reduce adhesive performance.

Before Ordering

Measure both sides of the corner to determine which profile size gives enough coverage.

Check whether you need a smaller option such as 15x15mm or a wider profile such as 40x40mm or 50x50mm.

Each strip is 1 metre long, so measure the total installation length before calculating the quantity required.

The adhesive is designed to resist water splashes, but this should not be interpreted as a guarantee for continuously wet or submerged applications.

What Does the Customer Get from This Product?

The customer gets a ready-to-fit 90° corner finishing solution that combines protection, coverage and decorative finishing in one profile.

Instead of leaving an exposed edge or using a trim that requires drilling, the integrated adhesive allows a cleaner installation on suitable prepared surfaces.

The choice of seven sizes and four colours also means the customer can select a profile based on both the amount of protection required and the appearance of the finished area.

Why Choose This PVC Corner Trim?

This profile is a practical choice for customers who want to finish and protect corners without complicated installation.

Its rigid PVC construction, self-adhesive fixing, multiple size options and easy-clean surface make it useful for a wide range of interior corner and edge-finishing projects.

Frequently Asked Questions

What sizes are available?

The available profiles are 20x10mm, 15x15mm, 20x20mm, 25x25mm, 30x30mm, 40x40mm and 50x50mm.

How long is each PVC corner trim?

Each profile is 1 metre long, approximately 3.28ft.

What surfaces can it be fitted to?

It is designed for compatible walls, tiles, terracotta, wood, metal, plastics and similar prepared surfaces.

Does it require screws or drilling?

No. It uses integrated self-adhesive tape and is intended for adhesive installation.

Is the adhesive waterproof?

The adhesive is described as resistant to ageing and water splashes. It should not be treated as a guarantee for continuous water exposure or submerged use.