Brushed Gold Aluminium Flat Bar Strip – 15 & 20mm | 0.5m, 1m & 2.5m

This Brushed Gold Aluminium Flat Bar Strip provides a slim decorative finish for furniture, walls, tiles, panels and interior detailing.

Made from anodised aluminium, the profile has a Brushed Light Gold satin finish with a fine linear texture. The colour is closer to champagne or light brass than deep yellow gold, giving it a warmer and more understated appearance.

At only 2mm thick, the strip creates a slim finishing line without adding unnecessary bulk. Choose from 15mm or 20mm widths and three lengths: 0.5m, 1m and 2.5m.

Key Features

• Brushed Light Gold anodised aluminium
• Soft satin finish with visible brushed texture
• Champagne-gold / light brass appearance
• 15mm and 20mm width options
• Consistent 2mm / 0.08in thickness
• Available in 0.5m, 1m and 2.5m lengths
• Slim flat profile for decorative finishing
• Ready-finished surface with no painting required
• Suitable for covering compatible panel and board joints
• Easy to cut to the required length
• Can be installed with suitable adhesive, screws or rivets

Product Specifications

Available Sizes & Lengths

15 x 2mm

Available in:

• 0.5m / 50cm / 19.69in
• 1m / 100cm / 39.37in
• 2.5m / 250cm / 98.43in

20 x 2mm

Available in:

• 0.5m / 50cm / 19.69in
• 1m / 100cm / 39.37in
• 2.5m / 250cm / 98.43in

Sizes are stated as width x thickness.

Problems This Aluminium Flat Bar Helps Solve

Visible Panel or Board Joints

Joins between compatible panels and boards can leave a noticeable line. The flat strip can be used as a decorative cover to create a cleaner finish.

Plain Furniture or Wall Edges

Furniture fronts, shelving and wall details can sometimes look unfinished. The brushed gold strip adds a defined decorative line without requiring a bulky profile.

Short Profiles Creating Too Many Joins

For longer wall or panel details, multiple short trims can interrupt the finished appearance. The 2.5m option allows longer continuous runs with fewer joints.

Decorative Finishes That Look Too Bright

Highly polished gold may be too reflective for some interiors. This brushed satin finish gives a softer champagne/light-brass appearance.

Different Coverage Requirements

The choice between 15mm and 20mm widths allows customers to select a more discreet or slightly wider decorative strip according to the application.

Benefits of This Brushed Gold Flat Trim

Slim 2mm Profile

The low-profile construction gives a neat decorative finish without adding excessive depth.

Choice of Three Lengths

Use 0.5m for smaller details, 1m for general-purpose applications or 2.5m for longer uninterrupted runs.

Two Width Options

Choose 15mm for a more subtle line or 20mm where slightly greater coverage is needed.

Ready-Finished Surface

The anodised gold finish requires no painting before installation.

Easy to Coordinate

The light gold tone works particularly well alongside brushed brass fittings, warm woods, marble and neutral interior finishes.

Applications

Suitable for compatible:

• Furniture edges
• Shelf fronts
• Cabinet details
• Panel joints
• Board joints
• Decorative wall strips
• Tile detailing
• Furniture inlays
• Feature walls
• Headboard detailing
• Frames
• Interior accent lines
• Modern luxury interiors
• Art Deco interiors
• Japandi and Scandi-inspired interiors

Installation Guide

1. Measure the area and mark the required length on the aluminium strip.

2. Cut the profile using a suitable fine-tooth hacksaw.

3. Lightly file the cut edge where required.

4. Where two strips meet at a corner, mitre at 45° where suitable.

5. Make sure the installation surface is clean, dry, flat and stable.

6. Secure using a suitable adhesive, screws or rivets depending on the surface and application.

Handle the visible brushed face carefully during cutting and fitting to help maintain its appearance.

Before Ordering

First decide whether 15mm or 20mm width provides the right amount of coverage for your project.

Then select the length according to the application:

• 0.5m – smaller decorative details and short sections
• 1m – general-purpose finishing
• 2.5m – longer continuous runs with fewer joins

Each selected variant is supplied as one strip.

The Light Gold finish can appear slightly different depending on screen settings and room lighting.

What Does the Customer Get from This Product?

The customer gets a slim, ready-finished aluminium decorative strip with flexible width and length options.

Unlike a single-size trim, the customer can choose between 15mm or 20mm coverage and then select the most suitable length for the project.

The 2.5m option is particularly useful for longer wall, furniture or panel details because it can create a cleaner continuous line with fewer joins.

Why Choose This Brushed Gold Aluminium Flat Bar?

This profile is a practical choice for customers who want a subtle metallic finishing detail rather than a large or highly polished gold trim.

Its 2mm thickness, satin light-gold surface, two width options and three available lengths make it suitable for both small decorative details and longer interior accent lines.

Frequently Asked Questions

What widths are available?

The strip is available in 15mm and 20mm widths, both with a 2mm thickness.

What lengths can I choose from?

Both widths are available in 0.5m (19.69in), 1m (39.37in) and 2.5m (98.43in) lengths.

What colour is the finish?

It has a Brushed Light Gold satin finish with a tone closer to champagne or light brass than deep yellow gold.

Is the strip self-adhesive?

No integrated self-adhesive backing is specified. It can be installed using a suitable adhesive or, where appropriate, screws or rivets.

Can the aluminium flat bar be cut to size?

Yes. It can be cut using a suitable fine-tooth hacksaw and the cut edge can be lightly filed for a cleaner finish.