70mm Anodised Aluminium Door Threshold Strip

This 70mm door threshold strip provides a wide, durable finish across joins between two compatible floor surfaces. The 70mm face makes it particularly useful where a standard narrow threshold may not provide enough coverage.

Made from anodised aluminium, the profile creates a neat transition between laminate, parquet, vinyl, tile and fitted carpet. It can be used in doorways, between rooms and across wider openings where exposed flooring edges need a cleaner finish.

The strip is supplied pre-drilled for secure screw fixing and is available in 930mm, 1860mm and 2480mm lengths, with Silver, Gold and Champagne finish options.

Key Features

• Wide 70mm aluminium threshold profile
• 70mm width / 2.76in
• Strong anodised aluminium construction
• Pre-drilled for screw fixing
• Suitable for wider flooring joins
• Helps cover exposed floor edges
• Suitable for laminate, parquet, vinyl, tile and carpet
• Silver, Gold and Champagne finishes
• Three useful length options
• Suitable for domestic and commercial interiors
• Can be used at compatible front and external doorways

Product Specifications

Problems This 70mm Door Threshold Strip Helps Solve

Gaps Too Wide for a Narrow Threshold

Some floor transitions need more coverage than a standard narrow strip can provide. The 70mm face helps span wider joins and exposed edges.

Untidy Room-to-Room Transitions

Where two flooring surfaces meet, the unfinished joint can look rough or incomplete. This aluminium bar gives the transition a cleaner, more professional appearance.

Carpet Meeting a Hard Floor

The wide profile can be used across compatible joins between carpet and hard flooring, helping cover the meeting point neatly.

Exposed Flooring Edges

Laminate, vinyl, tile and parquet edges can remain visible at doorways. The threshold provides a protective cover over the joint.

Long Openings Requiring Fewer Joins

With lengths up to 2480mm, wider openings can often be covered with fewer separate sections.

Benefits of This Aluminium Door Threshold

Wide 70mm Coverage

The wider face is useful for larger gaps, broad transitions and busy doorway areas.

Strong Aluminium Construction

Anodised aluminium provides a durable finish suitable for regularly used entrances and room transitions.

Secure Screw-Fix Installation

Pre-drilled holes make positioning and mechanical fixing straightforward.

Three Length Options

Choose 930mm for standard doorways or 1860mm and 2480mm for wider openings and longer transitions.

Choice of Finishes

Silver, Gold and Champagne options make it easier to coordinate the threshold with flooring, door furniture and surrounding interiors.

Applications

Suitable for compatible joins between:

• Laminate flooring
• Parquet flooring
• Vinyl flooring
• Tiles
• Fitted carpet
• Carpet and hard floor
• Room-to-room transitions
• Doorways
• Open-plan floor joins
• Domestic interiors
• Commercial interiors
• Compatible front and external doorways

Installation Guide

1. Measure the doorway or floor transition carefully.

2. Cut the threshold to the required length using a suitable fine-tooth metal-cutting saw.

3. Position the strip centrally over the floor join.

4. Mark the fixing points through the pre-drilled holes.

5. Drill the substrate and insert suitable plugs where required.

6. Secure the threshold using appropriate screws and check that it sits firmly and evenly.

Make sure the flooring area is clean, dry and reasonably level before installation.

Before Ordering

Measure both the width of the floor join and the overall doorway length before selecting the profile.

The strip is 70mm wide, so check that this provides suitable coverage for your transition. No exact maximum height difference is specified, so the profile should be checked against the actual floor levels before ordering.

Choose the length that gives enough coverage while minimising unnecessary cuts or joins.

What Does the Customer Get from This Product?

The customer gets a wide, mechanically fixed transition profile that can cover larger floor joins while also protecting exposed flooring edges.

Compared with a narrower trim, the 70mm width gives extra coverage. The three available lengths also make the product useful for both normal doorways and wider openings, while the choice of anodised finishes helps create a more coordinated final appearance.

Why Choose This 70mm Door Threshold Strip?

This profile is a practical choice when a standard narrow door bar does not provide enough coverage.

Its wide aluminium face, pre-drilled fixing points and three length options make it useful for a range of flooring combinations and doorway sizes in both domestic and commercial settings.

Frequently Asked Questions

What width is this door threshold strip?

The profile is 70mm wide, which is approximately 2.76 inches.

What lengths are available?

It is available in 930mm (36.61in), 1860mm (73.23in) and 2480mm (97.64in).

What flooring can it be used with?

It is suitable for compatible laminate, parquet, vinyl, tile and fitted carpet transitions.

How is the threshold installed?

It is screw-fixed through pre-drilled holes. Suitable plugs may also be required depending on the substrate.

Can it be used between carpet and hard flooring?

Yes. It can be used as a cover strip across compatible carpet-to-hard-floor joins where the 70mm width suits the transition.